below a script which allows you to restart the hosts in a vSphere cluster sequentially. It prompts you to select a cluster and it begins the reboot each host sequentially in a safe manner. Lees verder PowerCLI: Restart ESXi hosts in a cluster sequentially
Good scripts are created out of frustration: And here’s a good example of this statement! I wasn’t able to find a script which was able to create a VMK-interface connected to a DVS, being a part of the vmotion netstack AND with a default gateway configured at the netstack-level (and not the VMK-if. The majority of the scripts (which I stole shameless from my collegeau … Lees verder PowerCli: Creating VMK-if on the vmotion netstack on a DVS (with the correct gateway IP configured)
When configuring a stretched VSAN cluster, the VSAN VMkernel interface is connected to the “default” netstack and manual routes must be added which point to VSAN subnet gateways, which enables VSAN communication in a stretched cluster configuration. Without the additional routes add to the ESXi-hosts, communication to the witness appliance and the remote site is not working. This script below shows the manual added routes … Lees verder PowerCLI: retrieve VMhost routes used for stretched VSAN clusters.
sometimes you have to change the root password for all ESXi hosts.You can use the PowerCLI Set-VMHostAccount cmdlet. But this requires you to connect to each individual ESXi host, it cannot be run when connected to the vCenter server. So, I’ve created a (rather small) script which changes the root passwords for all (or a subset) of the ESXi hosts, which are connected to a … Lees verder PowerCli: bulk change ESXi root passwords with vCenter
This blog contains some useful PowerCLI script which make the deployment of a VVD (4.3) a lot easier. It’s not a complete deployment script, some adjustments are needed. for step Configure the Management Cluster in Region A for step Set SDDC Deployment Details on the Management vCenter Server in Region A for step Create a vSphere Distributed Switch for the Management Cluster in Region A … Lees verder Some Useful PowerCLI scripts for VVD DIY-deployments